Our Tungsten Carbide wire drawing dies are the result of expert technology & precision craftsmanship.
Tungsten Carbide Wire Drawing Dies are specially desirable in steel wire applications and in other applications where the finish and wear resistance of Diamond dies are unnecessary and cost is a priority .
We offer a variety of Tungsten Carbide Dies for your various wire drawing needs , including shaped wire dies & Tube Drawing Dies
Our precise technology and exacting standards guarantee you uniformity from one die To the next and even better control of critical measurements , such as reduction angle, bearing length and hole size dimension.
a : bell angle
b : approach angle
c : reduction angle
d : hole diameter
e : back reliefe angle
f : exit angle
| Details | SoftWire | HardWire |
|---|---|---|
| Bell angle(a) | 70°+/-20° | 60°+/-20° |
| Approach angle(b) | 35°+/-5° | 30°+/-5° |
| Reduction angle(c) | 16°+/-2° | 14°+/-2° |
| Bearing Length(%d) | 20-50 | 40-80 |
| Back reliefe angle | 10°+/-5° | 10°+5° |
SoftWire : Copper, Aluminium, Brass, Gold,Silver etc.
| TYPE | D | H | R | Range of Bores |
|---|---|---|---|---|
| W 102 | 8 | 6 | 2 | 00.20-00.50 |
| W 103 | 10 | 8 | 3 | 00.20-00.90 |
| W 104 | 13 | 10 | 4 | 00.20-01.90 |
| W 105 | 15 | 13 | 5 | 00.70-02.50 |
| W 106 | 17 | 15 | 6 | 00.70-03.00 |
| W 107 | 19 | 17 | 7 | 02.00-04.00 |
| W 108 | 22 | 18 | 10 | 02.50-06.00 |
| W 109 | 25 | 20 | 12 | 05.00-07.00 |
| W 110 | 30 | 24 | 14 | 07.00-13.00 |
| W 111 | 35 | 24 | 16 | 13.00-16.00 |
| W 112 | 40 | 24 | 18 | 16.00-19.00 |
| W 113 | 45 | 25 | 20 | 19.00-22.00 |
| W 114 | 50 | 25 | 24 | 22.00-25.00 |
| W 115 | 55 | 27 | 26 | 25.00-30.00 |
| W 116 | 60 | 27 | 30 | 30.00-32.00 |
| W 117 | 65 | 27 | 32 | 36.00-38.00 |
| W 118 | 70 | 30 | 36 | 38.00-40.00
|
